Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Super Cedar firestarters 30% discount
Use code Hearth2024
Click here
I just finished installing a Clydesdale insert. The draft for my break-in fire was disapointing. Could 45f degree temps effect the draft. How many break-in fires total? Thanks for all the help. I will post photos once I get secondary burn.
Thank you, Eileen. I'm still new to the site. But I really like it. I can't believe how much I've learned or how much time I'm spending on the computer. Any way, it was almost like I had to leave the door open for the fire not to go out. Ken
What ya burning for in those summer temps for anyway. :lol: Time to rototill the garden.
When the husky poop starts sticking to your boots, its time to plant.
Short chimney and warm weather. Bad draft is no surprise. No matter what kind of poop is sticking to your boots. :lol:
It is 42 outside right now North of Sixty and the 30 is coming up to a roll. Screw cold. Any definition of it. Gonna show you cat stove snobs how low and slow is done in a non-cat tonight. :coolsmirk:
Congrats! Don't be discouraged, it will take a little time to get it all figured out but I can't imagine that nice big insert won't have you toasty really soon!
Is 13" the total height of the chimney or just the height of the liner? I had a similar kit, but mine was a little over 15' from the stove up, a little over 17' to the bottom of the fireplace. It drafts fine. You did an insulated liner right? Is there a damper on your stove? (separate from the air intake?) And what was the previous fireplace Damper, did you have to ovalize through it or something? If so I wonder if something is amiss in there that you aren't getting the draft you need.
If you try it out again and you are still having this much trouble I would go back to your installer. You paid a pro and shouldn't have to wonder if your flue needed an extension I think. Seems like something they might have known. There are such thing as flue extender caps and stuff and your liner could have been fed all the way up if all you needed was a couple feet. I'm sure this can be solved one way or another, that's a great stove you got and should be heating like crazy!
Have to agree. This is a combo of a minimum height flue and mild outside temps. In this case adding a few feet of pipe could make a significant difference. As a test, try jamming a 3 ft. length of regular store bought pipe into the top flue and see if it makes a nice difference. No need for a cap for this, it is only a temporary test.
Here's a link to a video on a burning method that may help with starting the stove: