Question on Stainless.

[biggins08]

Do any of you fine Hearth.com members know if they make as well as where I could fine a "flexible" 6' 90 degree piece of pipe. I have a nasty angle where my stainless liner meets my stove. I have seen galvanized ones where the pieces are riveted together and the angles change as you move the piece around.

 

[Rhone]

Try http://www.kschimney.com/store/product.php?pid=1214&mfgr=28 I'm assuming you meant 6" not 6', and that piece can only be used for wood or pellet, not coal.

 

[smirnov3]

You can buy steel bellows, but they are EXTREMELY expensive.

 

[biggins08]

That is exactly what I was talkng about. Thank you for the link

 

[MountainStoveGuy]

you might make shure you have a T somewhere to prevent any stray rainwater that might blown down the cap and into your stove. A Tee with a clean out also makes cleaning a snap.

 

[biggins08]

Mountain-I don't really have room for a tee, the tube connects to the top of the stove in the fireplace. Very tight fit. Any suggestions?