Recommendations for a 3" OAK please?

[1Dtml]

I'm installing an Enviro Max in my basement, and I'm looking for a good 3" ID outside air kit that has 5' of piping.

I'm also looking for a source to purchase it from.

Thanks as always,

1D

 

[Wachusett]

I used 3" venting for hot water heaters. Cheaper than buying a brand name vent kit.

Vent hood and 5' of pipe is less than $25.

http://www.pexuniverse.com/store/category/4-z-flex-venting-parts-accessories

 

[1Dtml]

I used 3" venting for hot water heaters. Cheaper than buying a brand name vent kit.

Vent hood and 5' of pipe is less than $25.

http://www.pexuniverse.com/store/category/4-z-flex-venting-parts-accessories

Excellent, thank you so much!

So use the "3" Flexible Aluminum Duct (Fresh Air Intake)" for the 5' with the "3" Z-Vent Fresh Air Hood w/ Mesh Screen"?

Thanks again,
1D

 

[Wachusett]

Yup, you may also want to use hose clamps to hold the flex hose in place.
Not sure how the Maxx is for access to the air intake, but on my M55 I used a rigid length of pipe attached to the stove.
For this I used a short length of regular 3" HVAC ducting from Lowes.

 

[nailed_nailer]

Hit a muffler shop.
They can fab you something cheap.
Or you can bodge something together from parts in their back room.

I got my last one at an auto parts shop. Flexible muffler pipe.

---Nailer---