Suggestion - Alternative Heating Forum

Post in 'New Forum Hints and your Questions & Suggestions!' started by DevilsBrew, May 2, 2013.

  1. DevilsBrew

    DevilsBrew
    Expand Collapse
    Minister of Fire

    Joined:
    Apr 21, 2013
    Messages:
    687
    Likes Received:
    232
    It would be nice to have a place where unconventional designs can be discussed. I saw my RMH thread was moved to the Pre-1988 forum. If I want to post a current thread about a non-traditional heating device, then it really doesn't fall under the Pre-1988 category. For instance, where would a hotpod go? Pre-1988?
     
    Collapse Signature Expand Signature

    Helpful Sponsor Ads!





  2. BrotherBart

    BrotherBart
    Expand Collapse
    Hearth.com LLC Mid-Atlantic Division
    Staff Member

    Joined:
    Nov 18, 2005
    Messages:
    32,425
    Likes Received:
    9,635
    Loc:
    Northern Virginia
    Since the Hotpod goes into existing duct work it would go in the Boiler Room which is for central heating systems.
     
    Collapse Signature Expand Signature
  3. DevilsBrew

    DevilsBrew
    Expand Collapse
    Minister of Fire

    Joined:
    Apr 21, 2013
    Messages:
    687
    Likes Received:
    232
    Collapse Signature Expand Signature
  4. BrotherBart

    BrotherBart
    Expand Collapse
    Hearth.com LLC Mid-Atlantic Division
    Staff Member

    Joined:
    Nov 18, 2005
    Messages:
    32,425
    Likes Received:
    9,635
    Loc:
    Northern Virginia
    Collapse Signature Expand Signature
  5. Jags

    Jags
    Expand Collapse
    Moderate Moderator
    Staff Member

    Joined:
    Aug 2, 2006
    Messages:
    17,166
    Likes Received:
    5,875
    Loc:
    Northern IL
    You could post that in the regular stove forum. It is basically a "new" stove, but it appears to use dragon tech.
     
    Collapse Signature Expand Signature
  6. fossil

    fossil
    Expand Collapse
    Accidental Moderator
    Staff Member

    Joined:
    Sep 30, 2007
    Messages:
    10,527
    Likes Received:
    2,412
    Loc:
    Bend, OR
    As you can see, we (the staff here) don't know everything that our membership of thousands know. Most times we're making these decisions (where to move a post or thread about an appliance with which we're not familiar) on the fly, without a lot of knowledge of what's described or shown. We always want to do the right thing, so if you see that we've done the wrong thing...please start a Private Conversation with one of us Moderators and together we can get it put right. :cool: Rick
     
    Collapse Signature Expand Signature
    Jags, Gary_602z and raybonz like this.
  7. DevilsBrew

    DevilsBrew
    Expand Collapse
    Minister of Fire

    Joined:
    Apr 21, 2013
    Messages:
    687
    Likes Received:
    232
    Ok. Cool. Thanks.
     
    Collapse Signature Expand Signature

Share This Page