So bought a new Tstat a few days ago has been working fine. Last night I thought it was not shutting down. I come home today, my house is about 80+. Tstat is set at 70. That also says the temp is 80 degrees. I know I probably should ask mike H. but maybe if any of you know this question.. Will a Tstat on the PDVC not work if the LFF is too high or if the heat setting is set on a lower setting ( 2 or 3). With my test yesterday I left my settings at 7-5-1 heat setting #2.
BTW with those settings I went through about a bag of pellets in 12 hours vs the usual 8 or 9 hours when I have it at 5-4-1 with higher heat #. So if any thinks you are going through alot of pellets, try a higher LFF and lower heat # to see.
Anyway, any one know the answer before I PM mike...
BTW with those settings I went through about a bag of pellets in 12 hours vs the usual 8 or 9 hours when I have it at 5-4-1 with higher heat #. So if any thinks you are going through alot of pellets, try a higher LFF and lower heat # to see.
Anyway, any one know the answer before I PM mike...