So, I have been dealing with large amounts of smoke/steam coming from my chimney for the last year or so. I havent really been able get a grasp as to why. When I tried to figure out what was going on I decided to check my draft on the chimney to see if that may be something. I found that I have a steady draft of at least .08 and the guage bounces around a bit during a burn but it ranges from .08 to .13. If I remember correctly Tarm manual shows a steady draft of no more than .05. With that in mind how does my draft numbers being high relate to the smoking issue?? My stack temps have been high usually around 500-600 with turbulators installed and I seam to be producing a lot of btu's very quickly and seem to have more idle time. Just trying to see if all this is connected to my issues.