i finally purchased an IR thermometer and was experimenting with it, when my fire is well into its cycle and the secondaries are burning full force, the top of the stove is 600 degrees and the offset box is also close to 600 degrees. The pipe where it connects to the offset box is 550ish. Is this ok?
Temperatures of wood stove insert
- Thread starter Enviro
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
mikebinthesky
Member
Our stove top runs about 600-650 normally for the first few hours. With some wood we'll see a peak around 725F. Above that and the blower is on to cool it down.
- Status
Similar threads
- Locked
