1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)
    Caluwe - Passion for Fire and Water ( Pellet and Wood Hydronic and Space Heating)

US stoves model 5660 High limit switch

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by nick7777, Mar 6, 2013.

  1. nick7777

    nick7777 New Member

    Joined:
    Mar 6, 2013
    Messages:
    3
    My parents just bought a model 5660 pellet stove from TSC and its giving a code for the high limit switch. the igniter was just replaced and i was wondering if someone could post a pic of where the switch is located. im not with it now but i have been explaining it over the phone but can only do so much with the horrible parts diagram from the manufacturer. thanks in advance.

    Helpful Sponsor Ads!





  2. Brewer

    Brewer Member

    Joined:
    Dec 17, 2011
    Messages:
    85
    Loc:
    West central ohio
    You're right, parts diagram is not much help. It appears that the switch can be reset. I would look for the switch that has an orange wire coming off one side and a blue wire coming off of the other.(per the wiring diagram)

    They just bought the stove and the ignitor has already been replaced?
  3. pell it

    pell it Feeling the Heat

    Joined:
    Dec 2, 2011
    Messages:
    387
    Loc:
    Rhode Island
    Facing the stove front, right hand side door just above the convection blower.
  4. nick7777

    nick7777 New Member

    Joined:
    Mar 6, 2013
    Messages:
    3
    Pell it, could you post some pictures of how yours is wired up on both sides of the stove. it seems that the wiring diagram and the actual wires are very different in colors and routing. i would greatly appreciate it. they also forgot to install the low limit switch, which you wouldnt expect so many issues form a tractor supply co product...

Share This Page