First off, I apologize for all the questions this week but everything i needed for my install came in this week.
In the pic below is the setup for my chimney that i would like to use. The bottom tee will be about 14" below grade in a well lined with
gravel (which was helped here already here on that). I would like to add 36" pc on bottom tee then add a second tee and continue on up.
The reason for this is so i can clean from the ground up and stay off roof which is very steep.
I need to purchase 2 insulated plugs in case leaves get against bottom clean out and so that second tee stays insulated.
Anyone think this is a bad idea or have any other suggestions.
Thanks everyone.
In the pic below is the setup for my chimney that i would like to use. The bottom tee will be about 14" below grade in a well lined with
gravel (which was helped here already here on that). I would like to add 36" pc on bottom tee then add a second tee and continue on up.
The reason for this is so i can clean from the ground up and stay off roof which is very steep.
I need to purchase 2 insulated plugs in case leaves get against bottom clean out and so that second tee stays insulated.
Anyone think this is a bad idea or have any other suggestions.
Thanks everyone.