Anybody know where the "stupid" forum is? (pics)

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
There are dedicated chainsaw boots out there, but I usually just cut with my thick leather steel toe boots, and then switch to Bogs steel toe Ranchers for cold weather. I'm looking to try some dedicated chainsaw boots for cutting in the cold this winter.

Interesting video:


Gloves? My hands are sensitive to vibraitons, so I use Stihl or similar antivibration gloves.


Good video, thanks.

And yes, as Tramontana said above, this is what I told myself when I forked out for my chaps:

For my money, I would buy the higher grade chaps. Even the most expensive chaps are going to cost less than even a minor trip to the ER.
 
In my line of work (Firefighter/EMT) I've seen the gruesome damage a saw without a conscious can do. That goes for chain saws, table saws, circular saws and the like. I once had one guy cut his finger clean off with an industrial circular in a lumber yard. Upon arrival on scene I asked the patient who was clutching his hand in a rag if he knew where the finger was. He said "yeah in my pocket" and bent toward me slightly. I reached in his shirt pocket and pulled out his finger. He walked to the ambulance under his own power and I carried his finger. Bottom line keep focused and use PPE when applicaple.


That reminds me of one of my jobs as a teenager (decades ago) in at the local timber and hardware merchants. All the contractors used to come in in the morning with their orders for wood for the day, and we'd cross-cut and/or long-cut it for them on the big table saw or circular saw.

One thing that stuck out, was just how many of them were missing fingers or fingertips.

Another thing about this site, that you kind of discover after burrowing down a bit, is what MasterMech said earlier on: Most of the guys who cut a lot of wood — unlike a bunch of folk in various youtube chainsaw videos — wear chaps, eye protection and other PPE.

If you take a look at the guys that cut the most wood on this forum, I think you'll notice that most, if not all of them have something in common. Boots (steel toes at least), gloves, chaps, and helmets. Not to mention eyes and ears. All the time.

I think tiredness is the other wild card. And if you're a guy that's used to pushing it, in sports or whatever, it can be kind of hard to know when one is getting to a point where one should stop, as one might have that strong instinct to keep going. A pause in the action can give one that moment ask oneself about it.

-The rule is know where your hands are, using a chain saw is a little different you should know where the tip of your bar is, and where your body parts are in relation to where the saw is, and where it might go, and anticipate where the stress is, on the wood ,don't get in a big hurry, think about your next move, if you're getting tired take five, or quit for the day.
IMO
 
Much more readily available but I would be interested in finding some "summer" pants myself.
Swedepro does summer and winter cutting pants . I too toyed with the idea of cutting pants , but just went with full wraps for convenience of use .they are also a bit pricey .
 
  • Like
Reactions: Thistle and smokinj
Swedepro does summer and winter cutting pants . I too toyed with the idea of cutting pants , but just went with full wraps for convenience of use .they are also a bit pricey .

Summer just wear shorts! ;)
 
  • Like
Reactions: Thistle
Man, glad you are ok. I need to look into some chaps also. BTW, how do you like that new 261? I mean for cutting wood!!!??
 
  • Like
Reactions: HDRock
I have not tried full pants.. chaps are hot enough. AND you can take them off quick. If I was using the full wrap pants deal, I am sure I couldn't stand to wear jeans underneath.. and that would be a "problem".
 
Many close calls myself. Got chaps for picking blackberrys, figure I might as well save my overalls too.
 
I have not tried full pants.. chaps are hot enough.

Pretty sure the idea with the pants is to not have to wear another layer underneath (jens, etc.). I'm guessing I'm going to have to be the guinea pig on the forum and try a pair out. ;)
 
  • Like
Reactions: PapaDave
I guess I need PPE when I'm making kindling now too.

I was using an Estwing Fireside Friend last night to split up some old 2x4s for kindling. These things are great for that. I picked one up this summer and am very pleased with it.

A word of warning. They are very sharp. Don't ask me how I know...

I found out the hard way last night. I have no idea how I even did this. I was splitting a bunch of scrap 2x4s for kindling. I must have steadied a small split with my left hand and the Fireside glanced off the side. Dumb dumb dumb. <>

46 years old and never had stitches. Got 8 last night. Nice clean deep cut. At least I was in and out of the ER in under 1 1/2 hours.

image-jpg.83582
 
Wonder what a chain mail (sp?) suit goes for. Cooler than my chaps and effective against electrics saws too! :p

What's really stupid is that I have a pair of lightweight Kevlar gloves somewhere. Somewhere...

(Used them for summer riding when I still had my Honda ST1100. So what if they were yellow? :rolleyes: )
 
Wonder what a chain mail (sp?) suit goes for. Cooler than my chaps and effective against electrics saws too! :p

It would be tough on the saw chain though.
 
It would be tough on the saw chain though.

Brings to mind one point: After a hit with chaps, the bar and chain are roasted anyways. You might get lucky and be able to get all the fibers out of the sprocket and chain but most likely they will never be the same.
 
Smokey, for the guys new to chain saws, and those that need to refresher for what we know, how about a blow by blow how it happened. Lets see how many issues we can find.
 
Pain and disfigurement are bad enough but manageable.
However, I figure proper safety equipment costs far less than one trip to the emergency room.
Plus, I can usually keep doing what I want to do as opposed to being laid up with an injury.
Safe use of PPE and your equipment just seem to make sense no matter how you look at it.
 
I simply relaxed and let the blade swing down just enough to graze my knee.

Smokey, for the guys new to chain saws, and those that need to refresher for what we know, how about a blow by blow how it happened. Lets see how many issues we can find.
 
I actually did that with a hedge clipper a year ago. Sliced a hole in my jeans and scratched my leg. Glad it wasn't a chainsaw.
 
Status
Not open for further replies.