winslow pi40

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
  1. D

    Winslow PS40 motor starts itself while off

    This has happened maybe 2 or 3 times, most recently last night. We used it normally in the evening, turned it off, it cooled down, turned off and then around 3:30 in the morning I got up to turn off the ceiling fan (unrelated, not connected, and all of a sudden the Pellet Stove motor just...
  2. S

    Winslow PI40 Flex liner adapter

    The 3” pipe adapter (stove to flex pipe adapter) that came with my kit was not the right size for the Winslow PI40. I made it work with a crimping tool and a lot of high temp sealant but I am going to be removing it to clean the pipe and wanted to get an adapter that will fit better. Do any PI40...
  3. S

    Winslow PI40 will stop feeding pellets

    Hi all, I’ve seen some other PI40 threads on here that were similar (stove will ignite but will not stay lit) but in my case there are no red error code lights as described in the manual: (broken link removed to...
  4. M

    Winslow PI40 Pellet Stove

    Hello everyone. Our pellet stove has been acting up since last fall after we had the stove serviced and cleaned. When we start the stove (typically level 3) the stove starts, pellets ignite, but about 10-15 minutes in an error shows. To further complicate matters, it usually switches between two...
Top Bottom