Am I Nuts?

[RKBAGUY]

Don't know about you guys, but after nearly busting a gut positioning my Austroflamm Integra into place within my existing masonry fireplace, it occurred to me that there's got to be an easier way to slide a 250-pound stove around.

So, I got my crowbar and placed one of these under each of the corners.
http://www.amazon.com/Waxman-4704095N-2-Inch-Reusable-Sliders/dp/B001W6Q4VA/ref=sr_1_1?ie=UTF8&qid=1381944544&sr=8-1&keywords=super sliders

I'm here to tell 'ya, cleaning and maintenance just became a LOT easier.

 

[john193]

Funny you posted this as I have some laying around in my garage and I've been thinking of sliding some under mine. Sounds like I should go ahead and do it.

 

[Bioburner]

Works good on stoves over 400 lbs

 

[gbreda]

Yeah, those thing rock for moving anything on carpet. Saved my back a month ago when we re arranged the living room

 

[skibumm100]

Package says "use on carpet". What works on tile and cement board? I made a low profile caster kit for my York and it rolls right out. Once I go through the Integra and clean it and try to get it running, I may try to use the same casters. I think they're rated for 400#.

 

[krooser]

I have a 2000 lb capacity crane for my shop stove

 

[gbreda]

Package says "use on carpet". What works on tile and cement board? I made a low profile caster kit for my York and it rolls right out. Once I go through the Integra and clean it and try to get it running, I may try to use the same casters. I think they're rated for 400#.

This is what I bought. Has felt covers for tile and hardwood as well as carpet. Havnt used the tile hardwood function though.

http://www.homedepot.com/p/Everbilt-Movealls-and-Protectalls-83037N12/203566384#.Ul850xBsGkw

Says 8.98 ea, but "ea"is actually 4 to a pack

 

[Wood Nugget]

I use the round felt furniture cups. They work great. I can slide my stove on the tile easily for cleanings.

 

[RKBAGUY]

I use the round felt furniture cups. They work great. I can slide my stove on the tile easily for cleanings.

In my case, that wouldn't work on raw bluestone.

 

[db131]

What was the final decision for sliding on bluestone? Any 'felt' type assist/slider work?
-Dave