Amount of ash after a burn

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

tsquini

Minister of Fire
Hearth Supporter
Jan 8, 2009
712
North Shore, MA
I have started to pay attention to the amount of ash created after a burn. Recently I have been burning more maple. I have noticed the harder the wood and hotter the fire the less ash I create. Has anyone come up with a process to burn to create less ash from a burn?
 
I have started to pay attention to the amount of ash created after a burn. Recently I have been burning more maple. I have noticed the harder the wood and hotter the fire the less ash I create. Has anyone come up with a process to burn to create less ash from a burn?
Good question, but I think it's more species dependent than process dependent. My alder produces more ash than my fir, but it also tends to insulate the coals, making the coals last a little longer. Either way, it's not a huge difference.
 
It is species dependent. I've been burning pine lately and hardly have any ash. I don't have any coals either so it's just a quick burst of heat and it's over.
 
  • Like
Reactions: Backwoods Savage
I agree with the species dependant and also see differences from tree to tree along with different parts of the tree where the bark varies greatly. Also some woods, especially silver maple in my stove, leave unburnt coals which end up getting mixed in with the ash. This can really make the ash seem to build up drastically fast but if you sift the left over charcoal out there is very little actual ash.
 
I notice the same.

With Fir, I have very little ash.

This year, me entire supply is alder, it leaves a ton of ver fluffy ash and causes me to clean the stove more often
 
Maple does leave a good amount of ash. Nothing you can do about it.
Black Walnut does the same.
What you should find, is you can lightly lay a fireplace shovel over the ashes and it will compress them quite a bit.
 
Ash is just one part of the equation on burning wood. We simply do not keep track of which wood causes more ash (although we're not ignorant on this) but instead, we watch the stove and when the ashes need dumping, the job gets done then on with the show.
 
Status
Not open for further replies.