I have a Pacific Energy wood stove insert that is missing 2 bolts that hold the ash lip on. I tried a M6x20mmx1.0 pitch and it was really close, but not quite. 1/4-20 and 1/4x28 were not as good of a fit. Maybe M6 with 1.25 pitch? The manual doesn't say anything except to order a new hardware kit. Any ideas? thanks
Ash Lip bolt size?
- Thread starter firebox115
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Give the folks at the Chimney Sweep in Bellingham a call. They should know.
The Chimney Sweep Stoves, Fireplaces, Cookstoves and Barbecues
Shop for wood stoves, gas stoves, fireplaces, wood cookstoves, antique style kitchen appliances and ceramic cookers at The Chimney Sweep Online
chimneysweeponline.com
I know the bolt head is 3/8". I pulled out another bolt on the insert with a 3/8" head and it was a self-tapping.
Similar threads
