Ash sits in Burn pot

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Heater said:
I have a Harman P68 pellet stove.
The ash seems to build in the pot and the flame points forward.
Any thoughts?

What is the exhaust, please name each part and diameter of the pipe?

Eric
 
Not to argue, I am attempting to help but are you saying you have no adapter and the pipe is 9" off the ground which is the height of an exhaust on a Harman P-61?
 
My pipe come out of the stove.
It has a 90 degree going up about 3 and 1/2 feet to another 90 degree, and into the 6 inch flu.
I think this is what you are asking.
I appreciate your patience.
 
Heater said:
My pipe come out of the stove.
It has a 90 degree going up about 3 and 1/2 feet to another 90 degree, and into the 6 inch flu.
I think this is what you are asking.
I appreciate your patience.

The first thing I would do is take the pipe apart and totally clean it. After that check the gaskets on the door for a tight seal and then clean the circulation blower.

Eric
 
Status
Not open for further replies.