broke screw head off of baffle to whitfield traditions P11..can be fixed or used w/out??

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

jc120

New Member
Hearth Supporter
Jan 13, 2009
2
upstate ny
I have a whitfield traditions P11 and i turned the srews out too far on the baffle and tthey broke the head of the screw off. Can i run the stove w/out the baffle on or can i just drill these old screws out and put new ones in and re-attach the baffle? thanlk for any help or ideas.
 
Hey not a pro on your stove but as a mechanic anything can be drill and fixed and you can go to sears and buy a stud extractor easy to do. Use alot of rust breaker and soak overnite.

Good Luck,

Anthony
 
Hello jc,
It would be best to drill out the broken screws and replace them - that unit should not be ran w/o the baffle plate. This is not a hard repair but very necessary for proper stove operation.
 
Status
Not open for further replies.