Castle Serenity Blower Motor Issues - Help Needed

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here

RichBeBe

Member
Jan 17, 2020
5
NY
I have had my Castle Serenity for three winters, and it has been pretty flawless. The power switch went bad last year, and I swapped it with one from Amazon. All was working well until last week. I noticed a smoke smell and realized the blower was not working correctly. I thought it might be shot, but the blower came on like usual when I turned the stove off.
I checked everything, and the blower is working, but when I fire the stove, the exhaust fan works, but the blower does not work, no matter what speed I set the stove at. I do not like just throwing parts at things, but my thinking is the control module might be shot. Has anyone else had this problem, if so what did you do to fix it? TIA
 
You contradict yourself in your statement, so makes it hard to understand. So, lets start at the basics-
There are 2 "blowers"
The convection, or room,"blower",usually called a fan
The exhaust blower, or fan,or combustion fan/blower
If the combustion does not run, stove will not run
If room fan does not run, stove will overheat, shut down, and show a error code.
 
You contradict yourself in your statement, so makes it hard to understand. So, lets start at the basics-
There are 2 "blowers"
The convection, or room,"blower",usually called a fan
The exhaust blower, or fan,or combustion fan/blower
If the combustion does not run, stove will not run
If room fan does not run, stove will overheat, shut down, and show a error code.
I was referring to the blower as the convection part and the exhaust fan as the exhaust fan.
The exhaust is working properly it is the convection blower that only turns on when I turn the fan to the off setting.
 
Well, I don't have a wiring diagram for that stove, but don't see what else it could be. Call them, or send a message--
 
Try switching proof of fire switches or jumping the switch by unplugging stove, connecting the two leads together with paper clip then tape connected wires be careful wires not touching stove or you will short the stove out.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
  • Like
Reactions: VintageGal
Try switching proof of fire switches or jumping the switch by unplugging stove, connecting the two leads together with paper clip then tape connected wires be careful wires not touching stove or you will short the stove out.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

For the WIN!!! I oh you a virtual beer, soda, tea, coffee or whatever you want. Thank you
 
  • Like
Reactions: VintageGal and ARC