Comfortbilt HP 22 insert temperature reading

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

JAL

New Member
Oct 22, 2022
1
Durham, NH
Hey All,
I’m a new Comfortbilt HP 22 insert owner. It’s early, but my setup seems good and I’m super happy so far. Small/perhaps non issue: My display with room temperature reading is running around 110 F when the stove is on manual low (1) setting. Room temperature is actually 68. It drops down when the stove is off. Seems it’s probably just picking up heat coming off the stove since the sensor is so close. My concern is potential high temp shut down when it gets colder and I need a higher setting. Or, issues using the temp/eco mode. Any thoughts on a remedy? Did I route that wire poorly?