Designing a Hearth

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here

If you have a wood stove or a insert, which applies to the floor of your most recent hearth?

  • Bought a factory made hearth pad

    Votes: 0 0.0%
  • Combo of built myself and used factory made pad

    Votes: 0 0.0%
  • House already had appropriate noncombustible floor

    Votes: 0 0.0%

  • Total voters
    13
Status
Not open for further replies.

Vic99

Minister of Fire
Hearth Supporter
Dec 13, 2006
857
MA, Suburb of Lowell
For the past month I have been gutting and working on my living room. Since I am about to replace some wood in my old floor and redesign my hearth set up, I wondered what others had done.

Any regrets?
 
My current one is factory made and was about $300. It has a steel frame, stone on top, particle board on bottom and who knows what in the middle. We bought it last year because we spilled candle wax the one that was here when we moved in. The wax melted into it and smoked when the stove got hot. Unfortunately, since replacing my old smoke dragon with the Fireview, I realize that my "new pad is too small for the new stove. I intend to build a new one in the next few weeks. I regret the lousy timing of my wax spill and stove upgrade.
 
That's my plan for the second time around.
 
My hearth is 7 feet wide and 6 feet deep. I built it for a stove without heat shielding. (3 feet rule) It sounds big, but when you expect a big storm coming it's nice to bring a few totes of splits in and store them by the stove.

Matt
 
Also, I have portable racks for drying clothes that the wife sets up near the stove.

Matt
 
You have seen both of the hearths here, Vic.. The only regret I have is with the one in the my studio. I like the size of the foot print, but I wish we'd made the supporting framing for it smaller, so there was a deeper "toe kick" area. I find it's easy to jam a toe up against the woodwork and leave a scuff mark. Other than that, I love the size and I love the height which I feel gives the stove a nice "presence" in the room. You can sit on the sides of the tiled surface but it doesn't eat up too much floorspace, important for me since I frequently use the floor to do larger layouts for floorcloths or awnings/deck canopies.
 
Double post
 
Just about to put mine in - recessed into floor, ceramic board, cement board, some sort of tile. Thinking of limestone but worried about strength of tile and scratching with having to move stove every year to sweep (don't ask)
 
Built myself . . . mainly because it was cheaper . . . but also because I knew exactly what it had for a R value when completed . . . and I have to say, I was rather proud of it when finished . . . although I still haven't put up the wood trim on the edge as the living room renovation was put on hold for a bit (my wife and I needed to take a break from the work.)
 
Status
Not open for further replies.