I'm shopping for a new liner and need help with some transitions.
Application is a free standing wood stove, alcove installation in old open hearth with fabricated block off plate. I am thinking 5in DuraLiner for the main run and DVL or Durblack welded seam for the stove to block off plate connection.
Here is a diagram:
The main run would be suspended from above with their cap kit and the slip section at the block off plate to allow for expansion.
It appears the damper(s) can be used as appliance connectors so from the stove up:
The transition from 6>5in AND from standard pipe to the DuraLiner is where things get tricky.
Thanks!
Application is a free standing wood stove, alcove installation in old open hearth with fabricated block off plate. I am thinking 5in DuraLiner for the main run and DVL or Durblack welded seam for the stove to block off plate connection.
Here is a diagram:
The main run would be suspended from above with their cap kit and the slip section at the block off plate to allow for expansion.
It appears the damper(s) can be used as appliance connectors so from the stove up:
Damper (6DVL-AD/6DBK-DSW)
(2) 45s for offset section
Vertical slip section up to plate
The transition from 6>5in AND from standard pipe to the DuraLiner is where things get tricky.
- The only 6>5 transition I'm seeing is 5DLR-R6 which has the twist lock on the 5in side and a standard flare on the 6. This should allow direct connection to DVL/Single wall but some other adapter would be needed to get a flange for mounting to block off plate. Possibly 6DLR-MTSC1 or some other fabricated solution.
- My original thought was to use a support box/anchor plate as a transition for the plate (ie 5DT-RCS / 5DT-AP) but Duravent claims they are not compatible with Duraliner
Thanks!