We are in the middle of installing our DuraPlus Chimney and DVL stove pipe (thru the wall installation). We don't quite understand how the close clearance adapter connects to the chimney section extending thru the wall.
dvl close clearance HELP!!
- Thread starter Sandi630
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Sandi630 said:
The Close Clearance Adapter (CCA) should fit inside the inward end of the Class A section coming thru the thimble. The DVL should attach to the CCA by screws thru the black outer wall that DO NOT penetrate to the inner liner...
You might need another one at the stove connection...
The DVL "snaps" onto the CCA; however, the CCA doesn't snap onto the chimney pipe. The CCA snaps into the wall thimble and then the chimney pipe just slides into the CCA and really only about 1.5". So the chimney pipe isn't secured onto the CCA.
- Status
Similar threads
