Fields Controls Company Sidewall Power Venter

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
J

joe_pinehill

Member
Nov 29, 2008
115
nj
Hopefully someone can answer. I have a power venter for my oil furnace. The fan looks very rusty. It still pulls air. I was considering changing the fan out. The motor sounds fine, no bearing noise. Has anyone replaced fans on these units? How hard is it remove the fan from the motor shaft after 15 years of exposure?


Here's the fan:

https://jet.com/product/detail/4587...gclid=CL3C07TWvs8CFYo2gQodYtEADQ&gclsrc=aw.ds

Complete motor with fan:
http://www.supplyhouse.com/Field-Co...WGII-6-SWG-6?gclid=CIWoh-nWvs8CFRckgQod1JgP7A
 
Last edited:
Status
Not open for further replies.

Similar threads

Don2222
Exhaust blower testing for speed with control panel and cleaning. ( Whitfield Example )
Replies
0
Views
2K
The Pellet Mill - Pellet and Multifuel Stoves
Don2222
Don2222
jasonmunson
  • Locked
Do You Have a Stronger Motor For My Stove?
Replies
18
Views
9K
The Pellet Mill - Pellet and Multifuel Stoves
BrotherBart
BrotherBart
webfish
  • Locked
General GLOSSARY OF COMMON HEARTH AND HEATING TERMS
Replies
0
Views
7K
Articles
webfish
webfish
S
  • Locked
P68 auger squeak/squeal issue
Replies
4
Views
4K
The Pellet Mill - Pellet and Multifuel Stoves
GVA
GVA
Snowy Rivers
  • Locked
Update on new stove control
Replies
9
Views
2K
The Pellet Mill - Pellet and Multifuel Stoves
jtakeman
jtakeman
Top Bottom
Back