Going tomorrow to buy an Englander 25PVDC, need some advice...

[Tailrace]

Hi all....I'm going to Home Depot tomorrow to buy the 25PVDC. One of the questions I have is about the vent....about the only place I have to install the stove in my living room is between two french doors that go out to my deck. How far above the eave do I have to run the vent? I have more questions....but I'll start off slow!
Thanks for any and all replies

 

[DriftWood]

Planning a stove install is the first thing to do. Get a plan. Review it with the code inspectior in your area when you get a permit to install your stove.

Could you take photos of the place you want your stove inside the house and out. Or draw a floor plan. And post them.

Read the manual and follow it exactly.

http://www.englandsstoveworks.com/manuals/25-PDVC.pdf

http://www.englandsstoveworks.com/25-pdvc.html

http://www.englandsstoveworks.com

"How far above the eave do I have to run the vent?"

Questions/Problems: Please call Technical Support at (800) 245-6489.

 

[babalu87]

There are clearance issues regarding doors and windows, make sure you can meet or exceed.

Driftwood is correct PLANNING needs to be the FIRST step.

 

[Tailrace]

Thanks for the replys. I do have a plan in my head, and I will get it on paper and discuss it with the building inspector. In the meantime, I'll post some pics of where I plan on installing the stove, hopefully I can get them posted after I get home from work tomorrow. Thanks again!