I have an Enviro mult burner M55 that has overall been working very well for a number of years. I am wanting/needing to modify the outside pipe and cannot seem to find professional help. The stove vents horizontal straight out an exterior wall maybe 20” to a T, down to clean - up to vent, then a 6’ pipe and cap to keep rain out. I would like to redirect the pipe 45 degrees basically at or on top of the T (can I just rotate the T 45 degrees??) then 3 to 5’ at 45 then another 45 elbow to be straight vertical again with the 6’ pipe and maybe another 6 footer on top. Basically just putting the top 8’ or so higher and a few feet to the left of current.
The owners manual shows a flexible 5’ section snaking up a chimney, but how much bending and rising can it do, without stressing the stove or creating a hazard.
I am pretty sure what I want to do is doable, but I need someone qualified to confirm, and I need to buy the elbow(s) and extension.
Any insights or directions for assistance and pipe sourcing would be appreciated!
The owners manual shows a flexible 5’ section snaking up a chimney, but how much bending and rising can it do, without stressing the stove or creating a hazard.
I am pretty sure what I want to do is doable, but I need someone qualified to confirm, and I need to buy the elbow(s) and extension.
Any insights or directions for assistance and pipe sourcing would be appreciated!