How do you store your saws?

[Badfish740]

Now that I just picked up saw number four I'm trying to find a way to store them in the garage instead of just leaving them on the floor :lol: I was thinking of taking a 2x10 and cutting slots in it with a router and then mounting it on the wall so that I could put the bar through the slot and rest the power head on top of the board. Any reason not to store them that way? It would get them up off of the ground, and would be more secure than just setting them on a shelf. Most importantly, it will look really cool

 

[CodyWayne718]

I see no reason why it would be a problem

 

[amateur cutter]

Why bother with the router? Just bore cut the board with the saw to fit.

 

[CodyWayne718]

Speaking of bore cuts to hold saws. Guy down the road has about an 8" cedar post in a 5 gallon bucket filled with concrete that he bore cut and stores his saws in. Pretty neat idea really

 

[727sunset]

Although it's not the most elegant, it gets them off the floor.









(broken image removed)






(broken image removed)

 

[Badfish740]

Although it's not the most elegant, it gets them off the floor.

Wow-is that your basement? That's a hell of a girder!

 

[BrotherBart]

Dropping stuff off at the landfill one day I saw a guy next to me getting rid of a brand new clamshell car top carrier. I brought if home and put it by the splitter. It holds all of my saws, tools for them and PPE.

 

[727sunset]

Thanks Badfish, it's my garage, 2 storey.

 

[golfandwoodnut]

I am trying to find the picture, but the coolest storage I ever saw was a log with bore cuts to hold chainsaws. It was really cool. Here is one that has the basic idea, but I saw a better one.

 

[MasterMech]

"One of these things is not like the other....." lol That Husky is outnumbered! :ahhh:

 

[billb3]

garage shelf


If you don't trust your shelf to hold a saw you need new shelves.




Hooks are nice, too.
Gotta be careful with weight on them though.
I won't hang a ladder on cheap ones any more.

 

[smokinj]

On a milled slab.

 

[Badfish740]

I am trying to find the picture, but the coolest storage I ever saw was a log with bore cuts to hold chainsaws. It was really cool. Here is one that has the basic idea, but I saw a better one.

Nice! I did find this-you can guess where:

garage shelf
If you don't trust your shelf to hold a saw you need new shelves.

I trust the garage shelves just fine, but the more saws you put up there the more awkward it gets-especially the ones with longer bars. I think I'm going to build a "shelf" out of a 5 or 6' piece of 2x12 I have laying around and screw it to the wall in the garage. I'll bore cut four holes through it and store them that way. That way the bars will be pointing down and I could fit a bunch of saws up there.

 

[thewoodlands]

Now that I just picked up saw number four I'm trying to find a way to store them in the garage instead of just leaving them on the floor :lol: I was thinking of taking a 2x10 and cutting slots in it with a router and then mounting it on the wall so that I could put the bar through the slot and rest the power head on top of the board. Any reason not to store them that way? It would get them up off of the ground, and would be more secure than just setting them on a shelf. Most importantly, it will look really cool

This is how they displayed them in Boonville 2010.


zap

 

[wendell]

On a shelf in my garage with the bar pointing out and the saw at a 45 degree angle with a steel cable running through all of the handles and a padlock on the end. I do, however, take off the 42" bar on the 395.

 

[HittinSteel]

Here's my storage system.

 

[forvols]

Got mine cleaned, sharp and on a shelf atfter cutting. Only have 2