Merlin 3

[Amman]

Hello any Merlin 3 owners out there?
Be curious to know if the Merlin 3 manual has a schematic of the door hinge. Are there washers or spacers on the shaft,
My door, shaft part of the hinge has popped out of the pocket it sits in and won’t reseat, how to repair or what’s it supposed to be like originally. I suspect a washer has just worn out and fallen away.
I inherited the merlin3 (says made in New Zealand)when I bought my house 25 years ago, good service all this time, love it. Well at least I have all summer to figure it out. It didn’t let me down in heating season, hate to have to replace.
Thank you for any advice or pic you might have of door hinge.

 

[EatenByLimestone]

T

Post in thread 'Any info on the Merlin3'

Sep 30, 2010

It comes up in a couple different places, the one I saw yesterday was this one: it's a UK site.
http://www.mkfireplaces.co.uk/merlin-stoves.html

http://www.mkfireplaces.co.uk/stoves.html

Then there's this website which indicates they are made or sold by dealers called Bronpi?

(broken link removed) Menu2.htm

Looks like it must be a European stove, I guess? I didn't see the "3" on those sites but maybe I wasn't looking hard enough!
You might have trouble finding parts if you needed them, but then again you might not!

(the lower link doesn't seem to link, you can cut...

• tickbitty

Here and there there’s a little mention of them.