Mod to overide the four blink status on Harman Board when using a thermostat

Status
Not open for further replies.
This was sent to me from a customer from someone else, thought I'd share.

This might help you visualize how simple it is. Set the room temp on the stove - set the night temp on the adjustable resistor - (by trial and error) - and forget it.
As for a high temp burn - you will get that in the morning when the stove comes back on high to heat the house back up from the night setting.
 

Attachments

S

smoke show

Guest
Great info for the Harman peeps.

Thanks for your contributions Scott and Bob.
 

fmsm

Minister of Fire
Dec 12, 2011
953
South of Boston MA
The credit needs to go to Bob H of Alton NH (603BOB). He is the genius that sent it to me
 

kcellwood

Member
Nov 2, 2011
100
Central Maine
Did the same thing but instead of a time clock I used a 7 day programmable thermostat. Thermostat is simply used to open and close the loop for the trimmer. The information was well documented here on this site somewhere. Can do a search to find it.
 

fmsm

Minister of Fire
Dec 12, 2011
953
South of Boston MA

jtakeman

Minister of Fire
Dec 30, 2008
13,497
Northwestern CT.
www.facebook.com
smwilliamson said:
As I thought, it was already on here. I just felt guilty holding on to a diagram you all should see.
Glad you posted it! I was possitive someone was going to ask for a print for us all to see. This thread will also help those that come searching for a cure! :)
 
Status
Not open for further replies.