I have a ravelli 100, sometimes at night my pellet stove turns off and on the display says no pelletts, yet the pelletts are filled more than half way. This has happened a couple times when leaving it running during the night.
Need help with pellet stove
- Thread starter Panicattack508
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
- Status
F4jock
Minister of Fire
Not familiar with your stove but this may indicate that pellets are not dropping from the hopper to the auger. Could they be bridging?
Bioburner
Moderator
Bridging can happen with some pellets and or the hopper design not very good. Pellets not being the industry standard of around 3/4 inch but over 2 inches raise problems with flow.
- Status
Similar threads
