Oops... (p35i)

RKBAGUY Posted By RKBAGUY, Nov 26, 2017 at 9:23 AM

  1. RKBAGUY

    RKBAGUY
    Feeling the Heat 2.
    NULL
    

    Sep 29, 2013
    286
    53
    Loc:
    Milford, PA
    OK, so I opened the door to scrape the burn pot, but I forgot to turn through temp dial to 1 before doing so. Now the stove seems to be in shut down mode - the pellets aren't feeding, and the convection fan is off. Could be that the temperature sensor isn't calling for heat, but thought I'd run it past you guys to see if I screwed the pooch.

    Sent from my HTC 10 using Tapatalk
     
  2. bob bare

    bob bare
    Minister of Fire 2.
    NULL
    

    Oct 31, 2013
    2,035
    352
    Loc:
    park county montana
    I never turn my accentra down,I just scrape it when fire is not huge.And I have the newest board,same as yours,I think.
     
  3. DAKSY

    DAKSY
    Patriot Guard Rider Moderator 2.
    NULL
    
    Staff Member

    Dec 2, 2008
    6,973
    1,264
    Loc:
    Averill Park, NY, on Burden Lake II...
    I routinely scrape my Harman burnpots without making ANY adjustments.
    Open the door. Scrape the burnpot & sometimes the heat exchanger.
    NEVER had an issue. You didn't hurt anything..
     
  4. bob bare

    bob bare
    Minister of Fire 2.
    NULL
    

    Oct 31, 2013
    2,035
    352
    Loc:
    park county montana
    I have seen mine kinda "stall" a little,if I had door open too long,takes back off in a bit.
     
  5. RKBAGUY

    RKBAGUY
    Feeling the Heat 2.
    NULL
    

    Sep 29, 2013
    286
    53
    Loc:
    Milford, PA
    LOL.

    Just logged back in to say that the stove restarted. Were all good. Thanks!

    Sent from my HTC 10 using Tapatalk
     
    bob bare likes this.

Share This Page