P38+ status light stays on.

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
G

Giuseppe

New Member
Nov 30, 2021
1
Ny
P38+ Pellet Stove.
Didn't use last yr 1/2 due to back surgeries.
Gave it a good cleaning as I usually do.
Status light stays on.
Cleaned the fines catch box and is tight.
Plate burn pot seems to have a gap on top..very small but paper will fit through it.
Could that be the issue?
Thanks
Joe T
 
You must log in or register to reply here.

Similar threads

J
Harman P68 - 6 Blink Status
Replies
6
Views
568
The Pellet Mill - Pellet and Multifuel Stoves
rickwai
rickwai
Don2222
Harman Advance 6 Blinks Status error slowly filling the burnpot on startup then the fire slowly dying out within an hour!
Replies
0
Views
230
The Pellet Mill - Pellet and Multifuel Stoves
Don2222
Don2222
B
Can't Figure It Out
Replies
5
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
Bigman32hockey
B
R
Quadra-fire Castile: Flame on/off every 5mins
Replies
9
Views
528
The Pellet Mill - Pellet and Multifuel Stoves
zrock
Z
K
Pellet heater vacuum problem
Replies
5
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
johneh
johneh
Top Bottom