Englander Parts

[seafoam]

I need the fan blower (or part number) for an early 24a model Englander. Patient number; D249807. Any help is very appreciated. Thanks in advance! Jim

 

[begreen]

Many of them used a generic small blower from Grainger's. See if this one fits.

Englander AC-16 Wood Convection Blower (20070) | Variable Speed Blower

Englander AC-16 Wood Convection Blower (20070) – Variable Speed Blower Assembly for Freestanding Wood & Coal Stoves Upgrade your stove's heat circulation with the Englander AC-16 Wood Convection Blower. Designed as a complete variable-speed blower assembly with a 3-position switch (Off, Low...

total-hearth.com

 

[seafoam]

Thank you kindly for the reply. This, darn it, is not the correct blower. The mounting flange on this one is round. Mine is square. My stove appears to be an early 24a model.

 

[EatenByLimestone]

Does it bolt into a heat shield or the heavy plate of the stove? If it’s the heat shield, you may need to drill some mounting holes.

 

[begreen]

Thank you kindly for the reply. This, darn it, is not the correct blower. The mounting flange on this one is round. Mine is square. My stove appears to be an early 24a model.

No problem, there are small ones with the square flange too. Just match up the dimensions.

Blower Motor, Psc 115V, 50/60Hz, Rpm 2720/3120 | 1Tdp7 Replacement | Dayton

Buy Blower Motor, Psc 115V, 50/60Hz, Rpm 2720/3120 by Dayton. Replaces OEM: 1Tdp7. Fast shipping on quality HVAC parts. SKU: Dayton.

total-hearth.com

The Grainger catalog has more detailed specs.
Grainger ITDP7
Grainger IDPT5

 

[Burnin Since 1991]

Thank you kindly for the reply. This, darn it, is not the correct blower. The mounting flange on this one is round. Mine is square. My stove appears to be an early 24a model.

post a pic of yours where the blower mounts

 

[begreen]

post a pic of yours where the blower mounts

including dimensions for the hole and mounting screw spacing

 

[seafoam]

Does it bolt into a heat shield or the heavy plate of the stove? If it’s the heat shield, you may need to drill some mounting holes.

Hi Matt! Thanks for the reply. Mine mounts on the rear lower left. It's a square opening, the gasket is there and there are holes for bolts. I have the original fan, but it's kaput! There are NO numbers on it anywhere! I'll take pics tomorrow and attempt to post. Thanks again for your input. Jim

 

[seafoam]

including dimensions for the hole and mounting screw spacing

Good idea! I'll take pics, measurements and post tomorrow. Good Lord willing. Thanks for your input! Jim

 

[seafoam]

post a pic of yours where the blower mounts

I plan on doing just that tomorrow! Thank you for helping!

 

[seafoam]

No problem, there are small ones with the square flange too. Just match up the dimensions.

Blower Motor, Psc 115V, 50/60Hz, Rpm 2720/3120 | 1Tdp7 Replacement | Dayton

Buy Blower Motor, Psc 115V, 50/60Hz, Rpm 2720/3120 by Dayton. Replaces OEM: 1Tdp7. Fast shipping on quality HVAC parts. SKU: Dayton.

total-hearth.com

The Grainger catalog has more detailed specs.
Grainger ITDP7
Grainger IDPT5

I will attempt to post pics and measurements tomorrow. Thank you in advance! Jim

 

[seafoam]

post a pic of yours where the blower mounts

It's on my 'to do' list for tomorrow. Thanks!

 

[seafoam]

I (almost) forgot to post pics of my stove/heater as promised. I once had what could be describe as 'healthy brain matter'. But now 'scar tissue' best fits! Capish

I will attempt to post 3 pics in hopes someone out there has less 'upper scar tissue' than I and can help me to locate the correct, or suitable, fan blower. As you can see on the rear lower left there are 4 places for bolts. The second pic shows the heat exhaust to be well forward on the second level. I found a similar stove but this 'outlet' was located more on the rear of the second level.

 

[seafoam]

I'll be on a 200 mile 'road trip' tomorrow (Monday) and I have an earlyish appt Tuesday morning. I'll be back when my 'scar tissue' settles! Thanks in advance! Jim