More pics of the install. SS floor liner / SS Bottom Plate with insulation / Liner w/ insulation.
PE Summit Install - Part 2
- Thread starter dliguori
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
![[Hearth.com] PE Summit Install - Part 2](/talk/data/attachments/40/40585-9ef5dc76e330aec57e62bb1d11551cc7.jpg?hash=0pWxMPZmHR)
![[Hearth.com] PE Summit Install - Part 2](/talk/data/attachments/40/40586-15b8649c0c4a96eca979dd230d05f004.jpg?hash=iLtcy6xYcN)
![[Hearth.com] PE Summit Install - Part 2](/talk/data/attachments/40/40587-0ac8d10697d8445b59b53bb0aba676c5.jpg?hash=v3rjiVnr1z)
![[Hearth.com] PE Summit Install - Part 2](/talk/data/attachments/40/40588-c7212c8bd5d895c420333e96cf45c4da.jpg?hash=lpP1y5I7yM)
![[Hearth.com] PE Summit Install - Part 2](/talk/data/attachments/40/40589-16ccaa713eeb603e39c02646499678f9.jpg?hash=lzv7Kbs0Sb)
![[Hearth.com] PE Summit Install - Part 2](/talk/data/attachments/40/40590-bcf12ae0e9ce3fed610a56d280586c36.jpg?hash=02hjk-GoUB)
![[Hearth.com] PE Summit Install - Part 2](/talk/data/attachments/40/40591-e682d5e30fc54ce1d98a6e63df9e7154.jpg?hash=KpNU6wDPVm)
![[Hearth.com] PE Summit Install - Part 2](/talk/data/attachments/40/40592-6ff8ed1c1935dce9263772f23caf5ed8.jpg?hash=Ky7WyJfTN-)
Nice! Reminds me of my PE Super installation last year. I particularly like your blockoff plate--very professional.
Better than professional! Nice work.
What's the light grey stuff on the perimeter of the hearth floor?
What's the light grey stuff on the perimeter of the hearth floor?
The light stuff on the perimeter is thinset. Used it to fill in the gaps around the cement board and the walls / front.
For those of you with the Summit inserts, where do you take a temp reading and what temps do you get. Curious on your best operating range and your highest temps you had. I take my temps with an infrared laser and I usually have 500-650 on the glass door and 900+ if I open the door and shoot the secondary baffle plate.
For those of you with the Summit inserts, where do you take a temp reading and what temps do you get. Curious on your best operating range and your highest temps you had. I take my temps with an infrared laser and I usually have 500-650 on the glass door and 900+ if I open the door and shoot the secondary baffle plate.
I'm not sure if you will get the most accurate reading off the glass. Try the face of the insert just above the corners of the door. Stove should be running in the 650-700F range with a good fire. The temp will drop a bit if the blower is running, so 550-650F may be what you see.
- Status
Similar threads
