PA_Clinker
Member
When you say "my stoves control board started freezing up", what exactly was happening? Did the stove feed & ignite the pellets and later go out, or was it just completely dead?
I only ask because maybe the board, or boards were functioning properly and just responding to feedback from a faulty vacuum switch or improper negative pressure? These things can get complicated to troubleshoot. Is the venting setup the same as your dad's stove?
I only ask because maybe the board, or boards were functioning properly and just responding to feedback from a faulty vacuum switch or improper negative pressure? These things can get complicated to troubleshoot. Is the venting setup the same as your dad's stove?