My stove has stopped working correctly. When I turn the dial up to start the stove, the exhaust fan comes on but the igniter doesn't come on and the auger doesn't operate. I have checked the fuse on the circuit board, I have replaced the igniter, I have bypassed the snap disk and it still doesn't work, I have bypassed the vacuum switch and cleared the vacuum tube and it still doesn't work. I have checked the hopper lid switch and it is working correctly. I have checked all of the connections to the circuit board and other connections. I have cleaned the inside, and removed the exhaust motor and cleaned that area. I have removed the auger cover and made sure that the auger is rotating freely. But she still wont start up ?
In addition to this problem, we are also experiencing a lot of ash coming out from around the exhaust motor fan shaft.
In addition to this problem, we are also experiencing a lot of ash coming out from around the exhaust motor fan shaft.
Last edited:
