Quadra fire 1200i feed motor

Corn flake Posted By Corn flake, Oct 5, 2018 at 11:33 AM

  1. Corn flake

    Corn flake
    New Member 2.
    NULL
    

    Oct 4, 2018
    2
    0
    Loc:
    CO.
    Ok last season Everytime my feed motor was activated it made a squeezing noise, so this year I pulled out the pellet stove accessed the feed motor and tried to start it to duplicate the sound or verify but the auger motor never started and I was wondering if it's because I had it pulled out from the wall or the feed motor completely quite working any information would be greatly appreciated cornflake
     
  2. kappel15

    kappel15
    Minister of Fire 2.
    NULL
    

    Sep 14, 2014
    2,022
    405
    Loc:
    Iowa
    Need more info. what year stove. Is hopper empty? Is stove new enough it has a hopper lid switch so when open, it shuts power off to motor?
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. Corn flake

    Corn flake
    New Member 2.
    NULL
    

    Oct 4, 2018
    2
    0
    Loc:
    CO.
    It 6 years old and does have a switch I replaced the auger motor and still can't get it to turn on I jumped the vacuum switch and still nothing
     
  4. kappel15

    kappel15
    Minister of Fire 2.
    NULL
    

    Sep 14, 2014
    2,022
    405
    Loc:
    Iowa
    Does call light come on and does exhaust fan come on?
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  5. Overfireinthehole

    Overfireinthehole
    Member 2.
    NULL
    

    May 5, 2017
    240
    56
    Loc:
    Miller MO
    I
    Are there any colored lights flashing in the control board? If so what color and how many times are they flashing. One amber flash and one or two blue flashes is normal. A blinking amber light or a green or red light indicates bad thermocouple. Is your hopper lid switch jumped or being magnetically closed or does yours predate those? Have you given the stove time to prime the auger with pellets or are you watching the auger with the access panel off? Are either of your two overtemps blown( manual reset on auger and auto on side of stove).
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...

Share This Page