Quadra-Fire CB1200 Classic Bay auger feed motor grinding noise?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Don2222

Don2222

Minister of Fire
Hearth Supporter
Feb 1, 2010
9,184
Salem NH
Hello
Stove works fine but every time the pellets drop and the pellet feed auger turns, there is a loud grinding noise?
See this noisy video - turn your sound up.
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

After replacing the auger feed motor, when the pellets drop it is very quiet. :)
See quiet video - turn your sound up.
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

When the auger was removed the leaking grease can easily be seen!!
Pic 1 - CB1200 pellet stove
Pic 2 - CB1200 pellet stove fire
Pic 3 - Original pellet stove auger & motor removed
Pic 4 - Out with the old leaky motor
Pic 5 - In with the new shiny auger motor

[Hearth.com] Quadra-Fire CB1200 Classic Bay auger feed motor grinding noise?


[Hearth.com] Quadra-Fire CB1200 Classic Bay auger feed motor grinding noise?


[Hearth.com] Quadra-Fire CB1200 Classic Bay auger feed motor grinding noise?


[Hearth.com] Quadra-Fire CB1200 Classic Bay auger feed motor grinding noise?


[Hearth.com] Quadra-Fire CB1200 Classic Bay auger feed motor grinding noise?
 
Last edited:
  • Like
Reactions: Washed-Up, ABusWrench and ARC
You must log in or register to reply here.

Similar threads

M
Castle Serenity feeding inconsistently - how to remove auger?
Replies
3
Views
107
The Pellet Mill - Pellet and Multifuel Stoves
mmcc
M
Don2222
U.S. Stove 5660 - Auger Bushing turns with auger and auger hole for hitch pin ripped.
Replies
2
Views
573
The Pellet Mill - Pellet and Multifuel Stoves
Don2222
Don2222
L
Auger shaft install (distance) & Auger motor temp 7000-500. Quadra Fire CB1200
Replies
5
Views
863
The Pellet Mill - Pellet and Multifuel Stoves
Don2222
Don2222
Don2222
Pelpro Pellet Jam caused new style round 2 RPM Auger Motor to leak grease. Is the auger motor bad? Can the grease be replenished?
Replies
3
Views
689
The Pellet Mill - Pellet and Multifuel Stoves
Don2222
Don2222
D
HOW DO YOU INSTALL AN AUGER MOTOR ON A WHITFIELD QUEST PELLET STOVE?
Replies
18
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
DarbyDog
D
Top Bottom