Quadra Fire Contour Pellet Stove cheap

[Don2222]

Hello

Interesting but an older model. Any comments?
(broken link removed to http://nh.craigslist.org/hsh/2701550046.html)

Looking to sell an 11 year old Quadra Fire Contour pellet stove, in need of a new exhaust fan (part costs $250).

 

[DexterDay]

Lots of Quad parts are interchangable. Have you looked at what other models the Combustion blower fits on? If it fits the newer Quads, then search "Better built combustion blower for your Quad". If ithe part # isnt the same, then sorry. I tried. But it seems for around $100-$150, you can get one that will fit.

Have you checked Ebay, CSH incorporated, Rotom, Etc?

Seems you could find one for less than what you posted.. Are you starting a "Used Hearth Shop". I have a 30 x 40 building we put up for Horses. Its empty now (No time for Horses). I wish I could start a business of some sort out of it?

 

[wert]

If you only need an exhaust fan try
http://www.electricmotorwarehouse.com/fasco/fasco_blower.htm
Hope this helps

 

[Don2222]

If you only need an exhaust fan try
http://www.electricmotorwarehouse.com/fasco/fasco_blower.htm
Hope this helps

That is a good place. I matched up a blower there for a Pelpro and it was half the OEM replacement!

 

[Don2222]

Lots of Quad parts are interchangable. Have you looked at what other models the Combustion blower fits on? If it fits the newer Quads, then search "Better built combustion blower for your Quad". If ithe part # isnt the same, then sorry. I tried. But it seems for around $100-$150, you can get one that will fit.

Have you checked Ebay, CSH incorporated, Rotom, Etc?

Seems you could find one for less than what you posted.. Are you starting a "Used Hearth Shop". I have a 30 x 40 building we put up for Horses. Its empty now (No time for Horses). I wish I could start a business of some sort out of it?

Hi Dexter

Well, I am trying to make a few dollars doing some re-building. The paint job on the Pelpro came out awsome!!
https://www.hearth.com/talk/threads/83145/

Wow, I sure wish I had building like that or you lived closer!! I just getting a 10'x10' shed setup. It was as large as the building code will allow. Oh well, at least I can display one stove in it.

I have to replace the door gasket in the Pelpro Bay View now. It is going well so far.
https://www.hearth.com/talk/threads/83473/

Just found a good way of getting the ash pan open also!!
https://www.hearth.com/talk/threads/83423/

Did some research on Pelpro and the Bay View seems to be their flagship. The other models may not be as desirable.
Anyway, once I get the new door gasket in, I will pop in the missing firebrick that will be in this Wednesday and it will look like brand new! I think it only has 2 or 3 burn seasons on it. So after getting the room blower going it will be smoking
https://www.hearth.com/talk/threads/83103/

 

[DexterDay]

Nothing like a little side job. I originally bought my Shop stove and my Fathers stove (Both 25-PDV's) to sell.... Seeing how I bought mine for $300 with 21 bags of pellets and all needed pellet vent. And my Fathers, I traded an old Timberline woodstove (fair trade) that I got from my Father for free.. So I could have made some good money.. But in the long run, I (Dad too) would save more using them.

Good job. I wish you lived closer too. I have long thought about starting my own business. Looked into getting NFI cert in Pellet last year. Wife was Pregnant and had no time. Now I have a 10 yr old Son and a 6 month old Daughter. No time this year.

Good luck in your ventures Don. I read all your posts. You are a very thorough Man.

 

[goathead]

I'll shoot you a PM, might be interested. I'm looking for another stove for my sunroom.