Quadra-Fire Gas Fireplace Insert Model QFI30FB Ignition Problem

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

Tommy D131

New Member
Pilot flame will not ignite about 50% of the time. Have had this problem since new (2 years ago). Dealer tech has been out numerous times (cleaned & gapped igniter wire) but still the same problem. Have to unplug the power cord & then plug back in to reset the control module. Sometimes this works & sometimes it doesn't. Any suggestions on what the problem/fix is would be appreciated.
 
Pilot flame will not ignite about 50% of the time. Have had this problem since new (2 years ago). Dealer tech has been out numerous times (cleaned & gapped igniter wire) but still the same problem. Have to unplug the power cord & then plug back in to reset the control module. Sometimes this works & sometimes it doesn't. Any suggestions on what the problem/fix is would be appreciated.
You have two posts