Quadra-Fire Mt. Vernon Part Needed

[OregonFarmGirl]

We have purchased a used Quadra-Fire Mt. Vernon E2 Pellet Stove. Serial No. 007058 01745. Here is a screenshot of the part we need along with 2 screws. There is no # for this particular item and Quadra-Fire is no help as they say this Serial No. is no longer in their system.

This part holds the front outside panel (item #6 below).

 

[Ssyko]

You may have take some real good measurements and have one made or find a parts stove.

 

[OregonFarmGirl]

Yikes! I hope not. The person we purchased the stove from, bought it new and said it wasn't there then.

 

[Ssyko]

Stove was never used? Had to be there at one point or it couldn’t have been sold, except maybe for parts.

 

[OregonFarmGirl]

It was used for 5 years and then move to their garage. He told my husband the part was never there...hmm...

 

[Ssyko]

Have you tried to assemble it without that strap? I don’t know if the side will stay on without it

 

[steevo]

i would carefully remove the same part from the other side and either make 1 or have a local shop make 1 from it, would be pretty easy to duplicate

 

[SidecarFlip]

Find yourself a local fab shop with a Waterjet or CNC Plasma cutter and have the cut you one. Pretty simple job.

 

[rickwai]

I thought there was a guy on here a few months ago that bought a mocha brown quad that was a rusted out mess that ended up finding another and switched out the brown panels to the good body. He may have the old one around still

 

[rickwai]

Mt Vernon fire box.

Looking for any info on Mt Vernon OE fire box replacement. I've picked up a stove and found all internal metal is RUSTY! I basicly have the outer Mahagony, everything else is rusted out or froze up. The stove was apparently installed in a swimming pool area... Question #1, what fire box could i...

www.hearth.com

Here is the original thread. Later on he started another thread with pics of the stove but back to gether with new guts and the porcelain panels I think?

 

[OregonFarmGirl]

Thanks all! Coastal Farm Supply has an order request in to get this part. If they can't, we'll do the CNC route. Great idea.

I appreciate all of your replies.