Quadra Fire Santa Fe won't keep running

[skaufmann]

My pellet stove has red light call for heat lit. But even though space temp is well below set point, the stove won't run. If I hit the reset button it will work great for one cycle. However once the flame goes out it won't restart again?

I have cleaned the stove and the fire pot. I checked the thermocouple. Checked the snap disks. Increased the thermostat set point to rule out a temperature offset issue. I am wits end, please help.

Scott K.

 

[Ssyko]

Welcome to the forums Scott
For troubleshooting try removing the thermostat wires and put a wire across the 2 terminals. Then hit reset button and see if it runs normally