Ravelli rv80 and easyblaze pellets

[Davew37529]

Just out of curiosity I have been burning easyblaze for a little over two weeks. I have my feed rate turned down to -4 and the flow at 5. I have noticed that the last two bags that I have burned do not seem to be burning as hot. Should I adjust the feed rate or adjust the flow. I thought I had the stove dialed in pretty well but these last two bags have me second guessing myself.

 

[rich2500]

If they worked well for 2 weeks you should not have to adjust the stove, have you given the stove a good cleaning, get a brush up in the heat exchange tubes. could also just be that the last 2 days have been extremely cold so it just seems as though it's not heating as well.

 

[Davew37529]

Th

If they worked well for 2 weeks you should not have to adjust the stove, have you given the stove a good cleaning, get a brush up in the heat exchange tubes. could also just be that the last 2 days have been extremely cold so it just seems as though it's not heating as well.

Thanks I just cleaned the stove yesterday but did not brush the exchange tubes. Next cleaning I will get up there. It has been cold and with winds yesterday and last night it could just be that. I was making sure I didn’t need to make any adjustments since I am new to this. How often should the exchange tubes be brushed?

 

[rich2500]

I do mine once a week with a brush, run the tube scrapper in and out once a day

 

[Davew37529]

thanks for info I do the scraper twice a day in the morning and in the evening