Refractory Panel Repair

[Saintwic]

Last Dec. I had our local Top Hat Chimney repair come to replace and inspect my fireplace as the back refactory insert had a crack (prefab type). At that time they cleaned and did a full inspection. The bottom line was replace the back insert, clean and replace the chimney pan with a stainless steel model. I asked several questions about the life expectancy of the panel, other options etc. I was told that seasoned properly this panel would last years and that it was the best course of action. The total bill for the work performed was between $1400-1600.

Several days after the work was completed I made the first of a total of 4 smaller fires according to instructions; after which we had approximately 2 or 3 larger and longer fires before the season ended. Upon cleaning the fireplace in March I notice yet another hairline crack in the back insert. Given the lack of response by Top Hat Chimney Sweep (no other company available in the area) im looking for a dyi repair that can be done, such as a repair cement or bond. Any advice would be much appreciated.

 

[pen]

Sorry to hear of the problem. Do you have any pics of the issue?

pen

 

[Saintwic]

No, but I can snap a few. Thanks for the response.

 

[Saintwic]

Please excuse the lack of photography skills. I'm including the pic of the model number of the fireplace as well in the event that it makes a difference.