Rutland vs OEM gasket Adhesive

[cabinwarmer]

Good Day, I had this posted on a similar thread, but thought it may be better to start a new one to share.
Which one would you recommend I use? The Imperial brand was included in the OEM gasket kit. This is for the 1/2 door gasket.

Dave

 

[cabinwarmer]

Any opinions? Looks like from the past forum posts, RTV tube might be best. Going to start this project now, any feedback welcome.

Dave

 

[marty319]

Rutland,for sure

 

[cabinwarmer]

excellent, thanks

 

[cabinwarmer]

Rutland shows 24 hours to 100% cure. How long before I can light the stove?

 

[begreen]

I have started the stove after an overnight drying, probably around 12 hrs, using RTV without ill effect.

 

[cabinwarmer]

Thank you Sir.

 

[bholler]

I have done gaskets with a hot coal bed in the stove to the point I had to use gloves when handling the door. High temp silicone worked fine