"Seasoning" Fallen Wood before Bucking?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

Toasty-Yote

Burning Hunk
Dec 13, 2022
106
New York
This year I had a big cherry fall over at my dad's house and then had arborists take down some really tricky box elders that were hanging over my house. When I got to bucking them up, I found that what I thought was my very powerful Dewalt Flexvolt did not in fact like to cut large green logs at all. I was getting maybe six big cuts per battery which I am kinda ok with since I have three, but I also got the feeling that it was overall kinda hard on the saw; I don't think they were really meant for this kind of task.

My question is, if I were to leave the big chunks of box elder for a year, would it save much wear and tear on my saw due to being somewhat drier next year? I know there is likely to be some degree of rot but box elder has such crap BTUs anyway that I guess I am not losing much anyway. I guess I could skip it altogether and let it all go to the bugs but I am curious if leaving green wood for a year is a viable option in order to prolong the life of a saw.
 
Some woods seem tougher when dry then wet. May be time to get a tool appropriate for the task. Battery saws are cute for homeowners that need to cut up an occasional limb but for the firewood enthusiast they seem to lead mostly to disappointment.
 
Box elder can really load up the saw with chips when it is green and that can make it work harder. My old Homelite could get completely packed full of chips to the point where I would have to stop and clean them out. Crazy. That is the only species I ever noticed that happening with... but it is also fun to watch the torrent of chips pouring out of the saw, until it chokes anyway.

I wonder... if you used a skip tooth chain on that saw it might work better. The skip tooth gives the chain more chip clearing capacity and maybe your saw would not have to work as hard.

Box elder won't season very well if you leave it uncut. It rots pretty quickly. It is best to get it cut split and stacked sooner rather than later or it will go punky on you.
 
Thanks for the input. I have stopped bucking up the really big pieces for now. It doesn't seem worth it in terms of battery and motor wear when my dad's place down the road has so much nice dead standing apple, ash and maple that is about 6-10" diameter. I will pick at the box elder when I get bored and want to do a few quick cuts for fun. Mongo, very correct about box elder jamming up a saw. I had to take mine apart because the chips were getting in and jamming up the kickback trigger so the saw wouldn't run. I do think I will stick with the battery saw though. I live in the suburbs and only need about 4-5 cords a year so my Dewalt is good for making the neighbors hate me less. I feel like I already make enough extra noise between bucking limbs on the miter saw and splitting in my driveway.
 
Some woods seem tougher when dry then wet. May be time to get a tool appropriate for the task. Battery saws are cute for homeowners that need to cut up an occasional limb but for the firewood enthusiast they seem to lead mostly to disappointment.
My dad has switched over almost entirely to a battery powered saw for firewood and loves it. But he has a stihl not a dewalt.
 
My brother has a Milwaukee battery saw that he likes a lot, and he has a whole fleet of pro saws to choose from too.
I like box elder for spring and fall firewood, have cut a bunch of it and never had any issues with plugging things up. My only issue with it is it's often not straight wood, so stacking neatly can be a challenge.