Hello everyone,
I have a Harman p-38 that I would like to use a wireless thermostat with. The one I bought is this one:
(broken link removed to http://www.ebay.com/itm/270695227898?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_814wt_1131).
The problem I'm having is when I connect the receiver to the two terminals on the board the stove goes to turbo and stays. (This is when the thermo is not calling for heat) When I checked the receiver leads with an ohmmeter I get no continuity. Am I correct that the receiver just acts as a switch or am I missing something. I am wondering if maybe the receiver is defective? Or is this thermostat not designed to be used with this stove? This forum is a great resource and I am thankful for all the great posters.
denny
I have a Harman p-38 that I would like to use a wireless thermostat with. The one I bought is this one:
(broken link removed to http://www.ebay.com/itm/270695227898?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_814wt_1131).
The problem I'm having is when I connect the receiver to the two terminals on the board the stove goes to turbo and stays. (This is when the thermo is not calling for heat) When I checked the receiver leads with an ohmmeter I get no continuity. Am I correct that the receiver just acts as a switch or am I missing something. I am wondering if maybe the receiver is defective? Or is this thermostat not designed to be used with this stove? This forum is a great resource and I am thankful for all the great posters.
denny