I called timber wolf and they said it might be a bad pump, Im surprised that the pump on this went so fast. My buddies home depot special went 20 years without a hitch. I'll try the sea foam and hope for the best.
Governor - that was the word i needed refering to linkageCould be governor is not kicking in or the pump is not going to second hi pressure stage
pump pressure stalling engine
I also have seen carbs damaged from using e free fuelI have seen carburetors damaged from ethanol.
What exactly does sea foam do to the engine?
I took the carb off and clean the whole thing. There was a lil bit of crud on the bottom of the bowl but not much.Also check the sediment bowl on the shut off valve. It takes a 10mm wrench. Shut the fuel off. Take the bowl off and see uf there is anything in the bowl. Then put a container under it with the sediment bowl removed and turn the gas on. Make sure there is a steady supply of gas coming out. Also check to see if there is a screen in there. Some have them and some dont. It is possible that the carb is bad. My neighbor has a gc160 honda on a wood splitter and i cleaned the carb in solvent and my ultrasonic parts cleaner. Neither worked. Replaced with new carb with a new one and problem solved. Ran better than new. Remember the passage ways in the carb are very very small.