My True North TN10 door doesn't close far enough to allow me to close the latch. I can see a gap between the door and the stove body where the latch is. The gasket appears ok. I think it's a hinge problem but not sure if there's an adjustment. Would appreciate any advice.
True North TN10 door won't close
- Thread starter jpm995
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Burnin Since 1991
Minister of Fire
take some pics and post them so we can se what's happening. Do you have your manual? There may be something in it about adjusting the door.
I'll take pics tomorrow, manual has no adjustments. The hinges are welded to the frame and the door slips over the top. I think the door hinges will have to be bent with a crowbar. I'm nervous i'll break the hinge.
Burnin Since 1991
Minister of Fire
if they're welded like a lot of stoves and there are no adjustability to it, I'd be a little hesitant about prying it. Actually, don't pry on it.
When we get the pics, we can go from there!
Similar threads
