I have an unvented gas stove with ODS. It's been working great until recently. First the stove would come on immediately when switch was put to Thermostat position regardless of T-stat selection. Then when I started to troubleshoot that I turned off the gas. When I turned the gas back on to see if I fixed the problem, the pilot won't light now. I called a local dealer and he sounded uncertain. He suggested "maybe replacing the entire ODP TP assembly". Any suggestions? Thanks!
UNVENTED GAS STOVE PROBLEMS
- Thread starter dustoff77
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
these stoves are very sensitive if they sense Carbon monoxide they are suposed to shut down meaning turning off the gas.
Once the gas is turned off one has to engage the re-set switch. Most manuals will not give the owner that info or indicate where it is.
It is expected that the service tech resets after it is all checked out
Once the gas is turned off one has to engage the re-set switch. Most manuals will not give the owner that info or indicate where it is.
It is expected that the service tech resets after it is all checked out
- Status
Similar threads
