- Nov 7, 2006
- 12
Hi all! Been a long time.
My vacuum switch reads about 50 ohms with vacuum applied. In theory, it would read near zero.
Will this affect stove shutdown? I have a spare switch (reads about 10 ohms).
The switch is riveted to hopper; should rivets be drilled out and replaced with sheet metal screws?
Stove is Whitfield Advantage Plus, not currently installed.
My vacuum switch reads about 50 ohms with vacuum applied. In theory, it would read near zero.
Will this affect stove shutdown? I have a spare switch (reads about 10 ohms).
The switch is riveted to hopper; should rivets be drilled out and replaced with sheet metal screws?
Stove is Whitfield Advantage Plus, not currently installed.
