Which is it for Englander 30NC Clearances?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.
N

northernwoodsman

New Member
Hearth Supporter
Feb 13, 2008
35
Northern MN
How far away from the wall do I have to be??? I have a Englander 30NC with rear and side shields and a double wall stove pipe!

According to manual:
Stove -
side and rear shields, double wall connector (I have both) - 5"

Flue Connector to back wall-
Double wall connector with rear & side shields - 7"

Floor and wall protection-
8" behind stove

I know using 8" would be best, but it's taking up a lot of floor space and I have rafter/joist issues to deal with. Any help would be great!!!
 
Status
Not open for further replies.

Similar threads

S
Clearance question NFPA standard
Replies
3
Views
297
HearthStone
begreen
begreen
Morso1bo
Copper sheet for hearth pad and heat shield
Replies
23
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
Morso1bo
Morso1bo
ilikefire1234
Double wall wood pipe clearance
Replies
11
Views
4K
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
R
Wall Protection for Vermont Vigilant 1977
Replies
5
Views
631
Vermont Castings & CDW Dutchwest older Models
bholler
B
A
Installing Jotul 500 Tightest to Masonry Chimney
Replies
15
Views
648
The Hearth Room - Wood Stoves and Fireplaces
avc8130
A
Top Bottom